Mixer Mill MM 500 nano
Mixer Mill MM 500 nano with quick release clamp
(please order grinding jars and balls separately)
20.765.0003
MM 500 nano
200–230 V, 50/60 Hz
20.765.0004
MM 500 nano
100–120 V, 50/60 Hz
Screw-Lock grinding jars MM 500 control/nano
The Screw-Lock grinding jars of the MM 500 are pressure tight up to 5 bar and suitable for dry, wet and cryogenic grinding. Thanks to the integrated safety closure, they safely enclose inert atmosphere, for example after the air in the jar was exchanged with inert gas through an aeration lid. The special geometry of the jars makes filling of the jars with sample material very easy.
Always select a grinding jar size suitable for the sample volume (approx. 30% of the jar is filled with sample material). Grinding jars are provided in sizes ranging from 1.5 ml to 50 ml (not all sizes available in all materials).
The document “Grinding Jar Ball Charge” in the Downloads section provides details about usable volumes, maximum feed sizes and correct filling of the jars with grinding balls for dry and wet milling as well as cell disruption.
For efficient and contamination-free grinding processes the grinding jars are available in 4 different materials (no undesired abrasion).
The energy input increases with the density of a material. For pulverizing soft samples, materials with a low to medium density should be used, whereas for hard samples it is better to use high-density materials.
Available materials:
- Hardened steel (density 7.8 g/cm3; hardness ≤ 235 HB, medium abrasion resistance)
typically used for pulverizing medium-hard to hard and brittle samples.
- Stainless steel (density 7.7 g/cm3; hardness ≤ 245 HB, medium abrasion resistance)
typically used for pulverizing medium-hard to hard and brittle samples.
- Tungsten carbide (density 14.8 g/cm3; hardness 93.6 HRA; high abrasion resistance)
used for grinding very hard, brittle sample materials. By using tungsten carbide, contamination of the sample with iron is prevented.
- Zirconium oxide (density 6.05 g/cm3; hardness 1250 HV, high abrasion resistance) ceramic material suitable for pulverizing medium-hard to hard and fibrous samples. It is typically used for heavy-metal-free grinding processes or applications which aim at ultrafine particle sizes.
Hardened steel
01.462.0463
50 ml
01.462.0468
80 ml
01.462.0470
125 ml
Stainless steel
01.462.0447
50 ml
01.462.0467
80 ml
01.462.0420
125 ml
Tungsten carbide
01.462.0466
50 ml
01.462.0479
80 ml
Zirconium oxide
01.462.0464
50 ml
01.462.0417
80 ml
01.462.0471
125 ml
Multi cavity ginding jars MM 500 control/nano
01.462.0537
4 x 10 ml, 1.4112 stainless steel, incl. 3 pouring aids
22.462.0014
Pouring aid for 10 ml Multi cavity jar
01.462.0536
2 x 25 ml, 1.4112 stainless steel, incl. 1 pouring aid
22.462.0015
Pouring aid for 25 ml Multi cavity jar
Accessories for grinding in 1.5 or 2 ml vials
22.008.0012
Adapter made of aluminum for 18 x 2.0 ml / 1.5 ml Safe-lock reaction vials or
9 x 2.0 ml reaction vials made of stainless steel 316L
22.749.0001
Safe-lock reaction vials 2.0 ml, 1000 pcs.
22.749.0002
Safe-lock reaction vials 1.5 ml, 1000 pcs.
22.749.0008
Reaction vials made of stainless steel 316L, 2.0 ml, 10 pcs.
Accessories for grinding under inert atmosphere
Aeration lid for screw-lock grinding jars
incl. o-rings and sintered filter (please order lid insert and grinding jar separately)
22.107.0638
Aeration lid for screw-lock grinding jars 50ml
22.107.0639
Aeration lid for screw-lock grinding jars 80ml
22.107.0640
Aeration lid for screw-lock grinding jars 125ml
Lid insert for screw-lock grinding jars
03.474.0258
Aeration lid insert for screw-lock grinding jars 50ml, stainless steel
03.107.0570
Aeration lid insert for screw-lock grinding jars 50ml, zirconium oxide
03.474.0131
Aeration lid insert for screw-lock grinding jars 50ml, tungsten carbide
03.474.0259
Aeration lid insert for screw-lock grinding jars 80ml, stainless steel
03.474.0166
Aeration lid insert for screw-lock grinding jars 80ml, zirconium oxide
03.474.0167
Aeration lid insert for screw-lock grinding jars 80ml, tungsten carbide
03.474.0260
Aeration lid insert for screw-lock grinding jars 125ml, stainless steel
03.107.0565
Aeration lid insert for screw-lock grinding jars 125ml, zirconium oxide
Accessories for aeration lids for screw-lock grinding jars
05.114.0057
O-ring for screw-lock grinding jars 50 ml, 1 piece
05.114.0158
O-ring for screw-lock grinding jars 80 ml, 1 piece
05.114.0122
O-ring for screw-lock grinding jars 125 ml, 1 piece
22.186.0007
Sintered filter with O-ring, set of 10 pieces
22.864.0001
Valve set M8x1 for GrindControl and aeration lids
Accessories for grinding jars MM 500 control/nano
22.486.0006
Grinding jar stabilization pad
02.486.0050
Jar wrench for grinding jars
05.114.0057
O-ring for grinding jars 50 ml, 1 piece
05.114.0158
O-ring for grinding jars 80 ml, 1 piece
05.114.0122
O-ring for grinding jars 125 ml, 1 piece
Accessories for cold grinding MM 500 control/nano
22.354.0003
Cryo kit for cooling the grinding jars with liquid nitrogen (incl. insulated container 4-liter, 2 grinding jar holders, 1 pair of safety glasses)
Accessories MM 500 control/nano
05.114.0197
O-ring PTFE for grinding jars 50 ml, 1 piece, for cryogenic grinding
05.114.0196
O-ring PTFE for grinding jars 80 ml, 1 piece, for cryogenic grinding
05.114.0195
O-ring PTFE for grinding jars 125 ml, 1 piece, for cryogenic grinding
05.114.0207
O-ring for multi cavity jars, 4 x 10 ml, 1 piece
05.114.0208
O-ring for multi cavity jars, 2 x 25 ml, 1 piece
05.114.0212
O-ring for multi cavity jars, 4 x 10 ml, 1 piece, for cryogenic grinding
05.114.0213
O-ring for multi cavity jars, 2 x 25 ml, 1 piece, for cryogenic grinding
99.200.0034
IQ/OQ Documentation for MM 500 nano
Pressure and temperature measuring system GrindControl for Mixer Mills
incl. sensors and transmitter unit, case, opening aid and cleaning accessories for MM 500 control / nano / Emax
(please order lid insert and grinding jar separately)
22.782.0032
GrindControl for MM 500 control/nano/Emax grinding jar 125 ml
03.474.0242
GrindControl lid insert for MM 500 control/nano and Emax
grinding jar 125 ml, stainless steel
03.474.0245
GrindControl lid insert for MM 500 control/nano and Emax
grinding jar 125 ml, zirconium oxide
Accessories for MM 500 control/nano GrindControl
05.114.0122
O-ring for 125 ml grinding jars (MM 500 control/nano and Emax)
22.186.0007
Sintered filter with O-ring, set of 10 pieces
22.864.0001
Valve set M8x1 for GrindControl and aeration lids
Grinding balls
분쇄용 볼과 분쇄 용기는 항상 같은 재질이 선택되어야 합니다.
분쇄용 볼은 다양한 직경으로 사용이 가능합니다. 가장 중요한 것은 효율 적인 분쇄를 위해 볼은 시료의 가장 큰 입자보다 약 3 배 이상이 되어야 합니다. 마모를 방지하기 위해 항상 동일한 직경의 볼을 사용해야합니다.
분쇄용 볼의 갯수는 분쇄 용기에 따라 달라집니다. 다운로드의 "Grinding Jar Ball Charge (분쇄용 볼의 투입)" 문서를 통해 건습식 분쇄 및 세포 파괴와 관련된 분쇄용 볼의 사용 가능 양, 최대 투입 크기 및 올바른 투입에 대한 자세한 정보를 확인하시기 바랍니다. 추가 정보는 다운로드 내 “Material Analyses of Equipment & Accessories (장치 및 액세서리의 물질 분석)“에서 확인하실 수 있습니다.
사용 가능 물질:
- 경화 강 (밀도 7.8 g/cm3; 경도 ≤ 235 HB, 중간 내마모성)
일반적으로 중경질에서 경질 및 취성 시료의 분쇄에 사용됩니다.
- 스테인레스 강 (밀도 7.7 g/cm3; 경도 ≤ 245 HB, 중간 내마모성)
일반적으로 중경질에서 경질 및 취성 시료의 분쇄에 사용됩니다.
- 탄화 텅스텐 (밀도 14.8 g/cm3; 경도 93.6 HRA; 높은 내마모성)
초경질, 취성 시료의 분쇄에 사용됩니다. 탄화 텅스텐의 사용으로 철에 의한 시료의 오염을 방지할 수 있습니다.
- 산화 지르코늄 (밀도 6.05 g/cm3; 경도 1250 HV, 높은 내마모성) 중경질에서 경질 및 섬유질성 시료의 분쇄에 적합한 세라믹 재질입니다. 일반적으로 중금속 미 포함 분쇄 또는 초 미분쇄에 초점을 둔 공정에 사용됩니다.
Hardened steel
05.368.0029
5 mm Ø
05.368.0030
7 mm Ø
05.368.0059
10 mm Ø
05.368.0032
12 mm Ø
05.368.0108
15 mm Ø
05.368.0033
20 mm Ø
Stainless steel
22.455.0010
2 mm Ø, 500 g (approx. 110 ml)
22.455.0011
3 mm Ø, 500 g (approx. 120 ml)
22.455.0002
3 mm Ø, 200 pieces (approx. 6 ml)
22.455.0003
5 mm Ø, 200 pieces (approx. 25 ml)
05.368.0034
5 mm Ø
05.368.0035
7 mm Ø
05.368.0063
10 mm Ø
05.368.0037
12 mm Ø
05.368.0109
15 mm Ø
05.368.0062
20 mm Ø
05.368.0105
25 mm Ø
Tungsten carbide
05.368.0038
5 mm Ø
05.368.0039
7 mm Ø
05.368.0071
10 mm Ø
05.368.0041
12 mm Ø
05.368.0110
15 mm Ø
05.368.0070
20 mm Ø
Zirconium oxide
32.368.0005
0.1 mm Ø, 0.5 kg (approx. 135 ml)
32.368.0003
0.5 mm Ø, 0.5 kg (approx. 135 ml)
32.368.0004
1 mm Ø, 0.5 kg (approx. 135 ml)
05.368.0089
2 mm Ø, 0.5 kg (approx. 135 ml)
05.368.0090
3 mm Ø, 0.5 kg (approx. 140 ml)
22.455.0007
3 mm Ø, 200 pieces (approx. 6 ml)
22.455.0009
5 mm Ø, 200 pieces (approx. 25 ml)
05.368.0094
10 mm Ø
05.368.0096
12 mm Ø
05.368.0113
15 mm Ø
