Rotating Tube Divider PT 200

Rotating Tube Divider PT 200

PT 200 drive unit
incl. 10 sample bottles 500 ml and collecting receptacle 26 litres
(please order vibratory feeder, feeding kit and bottom cone separately)

40.412.0004

PT 200 drive unit

100–240 V, 50/60 Hz

Bottom cones and accessories PT 200

Selection help

The maximum dividing ratio depends on the maximum slot width which can be set on the bottom cone. This differs between the three bottom cones which are available.

The smallest dividing ratio depends upon the maximum particle size of the sample since the slot width should be at least 3 times wider than the maximum particle size. This means that smaller fractions can be taken from smaller particle sizes.

The slot width “X” to be set can be calculated from the ratio of the required fractional amount “QT” to the initial sample amount “QA” multiplied by the fixed pitch circumference “U” of the bottom cone (U = 795 mm for all bottom cones).

X = (QT/QA) x U

Example:

A representative sample of 200 ml is to be taken from an initial sample amount

of 5000 ml (dividing ratio 1:25). X = (200 ml / 5000 ml) x 795 mm = 32 mm. This means that the slot width must be set to 32 mm.

Please note: The sample amount should be sufficiently large to represent the initial amount.

42.787.0010

Bottom cone with 1 quick-release sample outlet, GL 55 thread,

slot width 159 mm, adjustable dividing ratio max. 1 : 5

42.787.0011

Bottom cone with 2 quick-release sample outlets, GL 55 thread,

slot width 110 mm, adjustable dividing ratio max. 2 x 1 : 7.2

22.003.0013

Collecting receptacle, 26 litres, plastic

22.523.0001

Sample bottles, GL 55 thread, 250 ml, 10 pieces

22.523.0002

Sample bottles, GL 55 thread, 500 ml, 10 pieces

Accessories PT 200

99.200.0022

IQ/OQ Documentation for PT 200

Vibratory Feeder DR 100 PT 200

DR 100 drive unit (please order feeding kit separately)

70.938.0001

DR 100 drive unit

220–240 V, 50 Hz

70.938.0002

DR 100 drive unit

110–120 V, 60 Hz