Sample Splitter RT 6.5 - RT 75
A faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Sample splitters ensure the representativeness of a sample and thus the reproducibility of the analysis.
The sample splitters RT are ideal for the on-site reduction of sample material. They are easy to use, easy to clean and do not need an electrical power supply.
cement clinker, chemicals, coffee, construction materials, fertilizers, fillers, flours, grains, metals powders, minerals, nuts, sand, seeds, soils, washing powder, ...
With sample splitters, one of the receptacles is used to pour a well mixed sample evenly into the dividing head. The material runs through the alternately arranged passages in the opposite direction into the two collecting receptacles under the dividing head outlets. With every operation the feed sample is halved. This can be repeated as many times as necessary until the required dividing quantity has been obtained.
| Applications | sampling and sample dividing |
| Slot size | RT 6.5: 6.3 mm RT 12.5: 12.5 mm RT 25: 25.0 mm RT 37.5: 37.5 mm RT 50: 50 mm RT 75: 75 mm |
| Number of slots | RT 6.5: 12 RT 12.5: 18 RT 25: 16 RT 37.5: 12 RT 50: 8 RT 75: 6 |
| Field of application | agriculture, biology, chemistry / plastics, construction materials, engineering / electronics, environment / recycling, food, geology / metallurgy, glass / ceramics, medicine / pharmaceuticals |
| Feed material | bulk materials |
| Material feed size* | RT 6.5: ~ 4 mm RT 12.5: ~ 8 mm RT 25: ~ 16 mm RT 37.5: ~ 25 mm RT 50: ~ 33 mm RT 75: ~ 50 mm |
| Batch size / feed quantity* | RT 6.5: <= 3 l RT 12.5: <= 3 l RT 25: <= 16 l RT 37.5: <= 16 l RT 50: <= 16 l RT 75: <= 16 l |
| Number of divisions | 2 |
| W x H x D | RT 6.5: 30 x 27 x 25 cm RT 12.5: 30 x 27 x 25 cm RT 25: 62 x 42 x 26 cm RT 37.5: 62 x 42 x 26 cm RT 50: 62 x 42 x 26 cm RT 75: 62 x 42 x 26 cm |
| Net weight | RT 6.5: ~ 3.5 kg RT 12.5: ~ 3.5 kg RT 25: ~ 21.5 kg RT 37.5: ~ 21.5 kg RT 50: ~ 21.5 kg RT 75: ~ 21.5 kg |
Content may be subject to modifications or corrections
The following situation is typical for many production plants: After a routine quality check, the production process is stopped or an already produced batch is suspended, because the analysis results were not within the relevant critical values. But does the tested product really deviate from the specifications? It is often not the product itself which causes irregular analysis results but a lack of understanding of the steps which come before the analysis.
