Search
日本語

遊星ボールミル　PM 100

遊星ボールミル　PM 100

お見積りは無料です!

各商品の「注文データ＆見積依頼」のタブを開いて、お見積りご希望の商品にマークを入れると、見積カートに商品が入ります。商品右欄にマークをいれ、カートに入れると見積依頼リスト作成画面に進みます。コンタクトフォームに必要事項をご記入いただき送信すると、弊社担当者から折り返しお見積りをお送りいたします。

ご支援いたします！

当社の専門家が、ご要望に最適なデバイスをご提案いたします。また、デモラボ、オンライン、またはご指定の場所での実演も承ります！

相談を申し込む

遊星ボールミル PM 100

(粉砕ジャーとボールは含まれていません)
20.540.0001
PM 100自転台1個　公自回転比 1:-2 
他の電源仕様については応相談
 

Accessories Planetary Ball Mills

22.661.0002Clamping unit for PM 100 / PM 400
03.025.0178Adapter for stacking grinding jars 50 ml - 80 ml
22.221.0002PM 100 用補助おもり01.462.0222/01.462.0227使用時に必要
02.728.0048Counter aid for sun wheel PM 100, PM 200 and PM 400
03.486.0062Opening aid for clamping unit of planetary ball mills
99.200.0006IQ/OQ Documentation for PM 100
 

Pressure and temperature measuring system GrindControl for Planetary Ball Mills

incl. sensors and transmitter unit, inseert of lid, software, case, opening aid and cleaning accessories for PM (please order grinding jars separately)
22.782.0033GrindControl for PM grinding jar EasyFit 50 - 125 ml
22.782.0034GrindControl for PM grinding jar EasyFit 250 - 500 ml
 

GrindControl lid inserts

03.474.0243GrindControl lid insert for 50, 80, 125 ml, stainless steel
03.474.0246GrindControl lid insert for 50, 80, 125 ml, zirconium oxide
03.474.0244GrindControl lid insert for 250 or 500 ml, stainless steel
03.474.0247GrindControl lid insert for 250 or 500 ml, zirconium oxide
 

Accessories for PM GrindControl with grinding jars EasyFit

05.114.0056O-ring for 50, 80 or 125 ml
05.114.0054O-ring for 250 ml - 500 ml grinding jars EasyFit (PM)
03.111.0438Flat gasket for 50 ml, 80 ml or 125 ml
03.111.0439Flat gasket for 250 ml - 500 ml
22.186.0007Sintered filter with O-ring, set of 10 pieces
22.864.0001Valve set M8x1 for GrindControl and aeration lids
 

Grinding jars EasyFit

(grinding jars EasyFit are suitable for all planetary ball mills)
 

Hardened stainless steel

01.462.023912 mL
01.462.024025 mL
01.462.051650 mL
01.462.051780 mL
01.462.0518125 mL
01.462.0519250 ml
01.462.0520500 ml
 

タングステンカーバイド製

01.462.049450 mL
01.462.049580 mL
01.462.0527125 mL
01.462.0497250 ml
 

メノウ製

01.462.050950 mL
01.462.051180 mL
01.462.0515125 mL
01.462.0502250 ml
01.462.0506500 ml
 

アルミナ製

01.462.050750 mL
01.462.0512125 mL
01.462.0499250 ml
01.462.0503500 ml
 

ジルコニア製

01.462.050850 mL
01.462.051080 mL
01.462.0513125 mL
01.462.0500250 ml
01.462.0504500 ml
 

Adapter for glass vials

01.462.0540Adapter for 24 x 1.5 ml glass vials, stainless, hardened steel
22.749.0009Glass vial 1.5 ml incl. septum cap, 100 pieces
05.181.0112Replacement pressure spring for adapter for 24 x 1.5 ml glass vials, 1 piece
01.462.0541Adapter for 7 x 20 ml glass vials, stainless, hardened steel
22.749.0010Glass vial 20 ml incl. septum cap, 100 pieces
05.181.0044Replacement pressure spring for adapter for 7 x 20 ml glass vials, 1 piece
 

Accessories for grinding jars EasyFit for wet grinding, grinding with inert atmosphere and Mechanical Alloying (MA)

Aeration lids (incl. inlay)

22.107.0613for grinding jars EasyFit 50 ml - 125 ml, hardened stainless steel
22.107.0616for grinding jars EasyFit 50 ml - 125 ml, tungsten carbide
22.107.0617for grinding jars EasyFit 50 ml - 125 ml, agate
22.107.0615for grinding jars EasyFit 50 ml - 125 ml, zirconium oxide
22.107.0618for grinding jars EasyFit 250 ml - 500 ml, hardened stainless steel
22.107.0621for grinding jars EasyFit 250 ml - 500 ml, tungsten carbide
22.107.0622for grinding jars EasyFit 250 ml - 500 ml, agate
22.107.0620for grinding jars EasyFit 250 ml - 500 ml, zirconium oxide
22.107.0619for grinding jars EasyFit 250 ml - 500 ml, aluminum oxide
22.864.0001Spare valve set for aeration lids M8x1
 

Inlay for aeration lid

03.474.0225for grinding jars EasyFit 50 ml - 125 ml, hardened stainless steel
03.474.0207for grinding jars EasyFit 50 ml - 125 ml, tungsten carbide
03.474.0208for grinding jars EasyFit 50 ml - 125 ml, agate
03.474.0206for grinding jars EasyFit 50 ml - 125 ml, zirconium oxide
03.474.0226for grinding jars EasyFit 250 ml - 500 ml, hardened stainless steel
03.474.0210for grinding jars EasyFit 250 ml - 500 ml, tungsten carbide
03.474.0211for grinding jars EasyFit 250 ml - 500 ml, agate
03.474.0209for grinding jars EasyFit 250 ml - 500 ml, zirconium oxide
03.474.0215for grinding jars EasyFit 250 ml - 500 ml, aluminum oxide
 

Aeration lids for grinding jars EasyFit

incl. o-rings and sintered filter (please order lid insert and grinding jar separately)

22.107.0636Aeration lid for grinding jar EasyFit 50 ml - 125 ml
22.107.0637Aeration lid for grinding jar EasyFit 250 ml - 500 ml
 

Insert for grinding jar EasyFit

03.474.0261Aeration lid insert for grinding jar EasyFit 50, 80 oder 125 ml, stainless steel
03.474.0262Aeration lid insert for grinding jar EasyFit 50, 80 oder 125 ml, zirconium oxide
03.474.0263Aeration lid insert for grinding jar EasyFit 50, 80 oder 125 ml, tungsten carbide
03.474.0268Aeration lid insert for grinding jar EasyFit 50, 80 oder 125 ml, agate
03.474.0264Aeration lid insert for grinding jar EasyFit 250 oder 500 ml, stainless steel
03.474.0265Aeration lid insert for grinding jar EasyFit 250 oder 500 ml, zirconium oxide
03.474.0266Aeration lid insert for grinding jar EasyFit 250 oder 500 ml, tungsten carbide
03.474.0267Aeration lid insert for grinding jar EasyFit 250 oder 500 ml, aluminum oxide
03.474.0269Aeration lid insert for grinding jar EasyFit 250 oder 500 ml, agate
22.186.0007Sintered filter with O-ring, set of 10 pieces
22.864.0001Valve set M8x1 for GrindControl and aeration lids
 

Safety closure devices

22.867.0011for grinding jars EasyFit 50 ml - 125 ml
22.867.0012for grinding jars EasyFit 250 ml - 500 ml
02.486.0055Opening aid for safety closure device
 

Gaskets for grinding jars EasyFit

O-rings

05.114.0086O-ring for 12 ml grinding jar EasyFit
05.114.0085O-ring for 25 ml grinding jar EasyFit
05.114.0054O-ring for 250 ml - 500 ml grinding jars EasyFit
05.114.0056O-ring for 50 ml - 125 ml grinding jars EasyFit
05.114.0063O-ring for 250 ml - 500 ml grinding jars EasyFit, agate
03.111.0438Flat gasket for 50 ml, 80 ml or 125 ml
03.111.0439Flat gasket for 250 ml - 500 ml
 

粉砕ボール

選択のガイド
選択のガイド
Grinding balls are available in different diameters. The rule of thumb is: for efficient milling the ball should be at least 3 times larger than the largest particle in the sample. To avoid abrasion and wear it is essential to only use balls with identical diameter.

The number of grinding balls depends on the jar volume used. The document “Grinding Jar Ball Charge” in the Downloads section provides details about usable volumes, maximum feed sizes and correct filling of the jars with grinding balls for dry and wet milling as well as cell disruption.

Grinding jars and grinding balls should always be made of the same material.

Available materials:
  • Hardened steel (density 7.8 g/cm3; hardness ≤ 235 HB, medium abrasion resistance)
    typically used for pulverizing medium-hard to hard and brittle samples.

  • Stainless steel (density 7.7 g/cm3; hardness ≤ 245 HB, medium abrasion resistance)
    typically used for pulverizing medium-hard to hard and brittle samples.

  • Tungsten carbide (density 14.8 g/cm3; hardness 93.6 HRA; high abrasion resistance)
    used for grinding very hard, brittle sample materials. By using tungsten carbide, contamination of the sample with iron is prevented.

  • Agate (density 2.6 g/cm3; hardness 6.5 – 7 Mohs, low abrasion resistance)
    a highly pure natural material suitable for pulverizing soft to medium-hard or fibrous samples. Due to its low-density agate is suitable for gentle grinding processes with low energy input.

  • Sintered aluminum oxide (density 3.8 g/cm3; hardness 1600 HV 0.5, medium abrasion resistance) is a ceramic material suitable for grinding soft to medium-hard or fibrous samples. It is mainly used for heavy-metal-free grinding processes.

  • Silicon nitride (density 3.6 g/cm3; hardness 1600 HV, high abrasion resistance) is a ceramic material suitable for grinding medium-hard to hard samples. Due to its low density silicon nitride is used for gentle grinding processes with low energy input. Thanks to the high abrasion resistance of the material it is also highly suitable for ultrafine grinding.

  • Zirconium oxide (density 6.05 g/cm3; hardness 1250 HV, high abrasion resistance)
    ceramic material suitable for pulverizing medium-hard to hard and fibrous samples. It is typically used for heavy-metal-free grinding processes or applications which aim at ultrafine particle sizes.

Please note:

The grinding tool material should be harder than the sample. For further information check the “Material Analyses of Equipment & Accessories” document in the Downloads section.
 

硬化鋼製

05.368.0029Ø　5 mm
05.368.0030Ø　7ｍｍ
05.368.0059Ø 10 mm
05.368.0032Ø　12ｍｍ
05.368.0108Ø　15ｍｍ
05.368.0033Ø 20 mm
05.368.0057Ø　30ｍｍ
 

ステンレス製

22.455.0010Ø　2 mm, 500 g (約 110 mL)
22.455.0011Ø　3 mm 500 g (約 120 mL)
22.455.0002Ø　3 mm, 200 個　(約 6 mL)
22.455.0001Ø　4 mm, 200 個 (約 14 mL)
22.455.0003Ø　5 mm, 200個 (約 25 mL)
05.368.0034Ø　5 mm
05.368.0035Ø　7ｍｍ
05.368.0063Ø 10 mm
05.368.0037Ø　12ｍｍ
05.368.0109Ø　15ｍｍ
05.368.0062Ø 20 mm
05.368.010525 mm Ø
05.368.0061Ø　30ｍｍ
 

タングステンカーバイド製

22.455.0006Ø　3 mm, 200 個　(約 6 mL)
22.455.0005Ø　4 mm, 200 個 (約 14 mL)
22.455.0004Ø　5 mm, 200個 (約 25 mL)
05.368.0038Ø　5 mm
05.368.0039Ø　7ｍｍ
05.368.0071Ø 10 mm
05.368.0041Ø　12ｍｍ
05.368.0110Ø　15ｍｍ
05.368.0070Ø 20 mm
05.368.0069Ø　30ｍｍ
 

メノウ製

05.368.0024Ø　5 mm
05.368.0025Ø　7ｍｍ
05.368.0067Ø 10 mm
05.368.0027Ø　12ｍｍ
05.368.0111Ø　15ｍｍ
05.368.0028Ø 20 mm
05.368.0065Ø　30ｍｍ
 

アルミナ製

05.368.0021Ø 10 mm
05.368.0112Ø　15ｍｍ
05.368.0054Ø 20 mm
05.368.0053Ø　30ｍｍ
05.368.0052Ø　40ｍｍ
 

ジルコニア製

32.368.00050.1 mm Ø, 0.5 kg (約 135 mL)
32.368.00030.5 mm Ø, 0.5 kg (約 135 mL)
32.368.00041 mm Ø, 0.5 kg (約 135 mL)
05.368.00892 mm Ø, 0.5 kg (約 135 mL)
05.368.00903 mm Ø, 0.5 kg (約 140 mL)
22.455.0007Ø　3 mm, 200 個　(約 6 mL)
22.455.0009Ø　5 mm, 200個 (約 25 mL)
05.368.0146Ø　7ｍｍ
05.368.0094Ø 10 mm
05.368.0096Ø　12ｍｍ
05.368.0113Ø　15ｍｍ
05.368.0093Ø 20 mm
05.368.010625 mm Ø
05.368.0092Ø　30ｍｍ

詳細情報