Home > Aplikace > Aplikace > Chemie

Chemie

Technické zprávy (21)

Preparation of Elastic Plastics for the Detection of PAH
Polycyclic aromatic hydrocarbons, short PAH, are usually a by-product of combustion and can be found, for example, in cigarette smoke or oil-based products. Mineral oil containing PAH is often used in rubber products as plasticizer, especially in black-coloured products such as car tyres, rubber grips of tools or rubber shoe soles. It was discovered that some polycyclic aromatic hydrocarbons are carcinogenic, so that maximum permissible values have been determined for the concentration of PAH in consumer products.

Size reduction of elastic plastics with volatile components
Neutral-to-analysis sample preparation for the detection of PAH and phthalates

Sample Preparation for XRF Analysis
From sample to pellet

Renewable raw materials are gaining ground
The representative sample preparation of plants requires experience

Traces of Heavy Metals in Toys
From Size Reduction to Analysis

Efficient Grinding at –196 °C
RETSCH’s New CryoMill for Safe and Reproducible Grinding with Liquid Nitrogen

Sick with Dolls
Traces of Heavy Metals in Toys

Green Chemistry in the Lab
Mechanochemistry is a very effective method to carry out syntheses without solvents and by-products. The technical literature describes a great number of reactions where a conversion of 100% is achieved. A precondition for the establishment of mechanochemistry in the industrial sector is the availability of suitable laboratory mills. A decisive factor is that – similar to conventional preparative chemistry – ambient parameters such as pressure and temperature can be documented and monitored. The Planetary Ball Mills and Mixer Mills from Retsch fulfill these requirements.

Tracking down hazardous substances (RoHS/WEEE)
Preparing electronic waste for obtaining representative analytical samples.
A solution for converting an electrical appliance into a meaningful analytical sample is described using a remote-controlled toy car as an example.

Size reduction within the context of sample preparation
In general “size reduction” is taken to mean the disintegration of solid substances by mechanical forces without altering their state.

Sample Preparation of Electronic Scrap in the Context of RoHS and WEEE
Since August 2004 new EU directives for the disposal of used electrical and electronic appliances as well as the restricted use of certain hazardous substances in these devices have become effective.

Consistent Milling on a Nano Scale
Planetary ball mills are helping scientists and engineers advance nanotechnology by providing a consistent way to produce nanoscale powders.

Sample Preparation of Plastics for X-Ray-Fluorescence Analysis
The elemental analysis of plastics has become more and more important. EC directive 91/338/EWG regulates the ban of cadmium in PVC, EC directive 94/62/EC defines limits for cadmium, lead, chromium and mercury in packing materials and EC directive 2000/53/EC defines limits for the same elements in end-of-life vehicles. This has created a strong need for a rapid and reliable testing method.

Cryogenic Preparation of Sample Materials
Within the context of sample preparation, size reduction plays an important role as it has a substantial influence on the results of the subsequent analysis. If the particles are too coarse or non-homogeneous the results of the analysis may turn out to be incorrect, especially if there is only a very small amount of sample material which represents the total amount.

Analysis of cadmium in plastics
In recent years, mass media have focused on the topics of the environment and environmental conservation. With the advancement in scientific technology, resource development has progressed.

Sample Preparation of Solid Materials for the XRF-analysis
X-Ray fluorescence is one of the most versatile methods to determine elements in a sample. The material is exposed to x-rays that cause each element to emit its own unique fluorescent x-ray. The subsequent analysis of the results is based on comparisons to standard samples with given chemical composition.

Die neue Power Generation
Planeten-Kugelmühlen haben seit jeher einen festen Platz in der täglichen Laborpraxis zur Feinzerkleinerung unterschiedlichster Materialien. Neben dem Mischen und Zerkleinern hat sich in den letzten Jahren auch im mechanischen Legieren z.B. thermoelektrischer oder hochkoerzitiver Materialien ein weiteres Anwendungsgebiet ergeben.

Herstellung von Nanopartikel mit der Planeten-Kugelmühle
Die Herstellung von Nanopartikeln, deren Größe im Bereich von 1 Mikron und kleiner liegt, ist in vielen technischen Bereichen immer mehr auf dem Vormarsch, denn sie ermöglichen die gezielte Veränderung von Materialeigenschaften.

Los especial del pigmento
Debido a la ilimitada variedad de colores y texturas que ofrencen los recubrimientos en polvo; muchos de los nuevos recubrimientosde aplicación especifica se crean en el laboratorio en pequeñas cantidades que luego se le envían al cliente para su aplicación y aprobación.

Molienda ultrarrápida y ultrafina
El nuevo molino ultracentrífugo ZM 200 de RETSCH es un molino de rotor no sólo extremadamente rápido y cuidadoso con el material molido, sino también de uso universal gracias a su amplia gama de accesorios.

Zusammenspiel der Kräfte
Planeten-Kugelmühlen ermöglichen mechanisches Legieren dank ihrer hohen Zerkleinerungsenergie

Mechanisch legierte Werkstoffe haben schon längst ihren Einzug in die moderne Werkstofftechnik gehalten. Viele neue Werkstoffe und Werkstoffkomposite wurden in den letzten Jahren durch intensive Forschung entwickelt und werden bereits industriell hergestellt. Mechanisches Legieren ist ein gängiges Verfahren, um Werkstoffpaarungen oder Komposite zu synthetisieren, die auf konventionellem Wege nicht realisierbar wären, wie z. B. das Verbinden von Natur aus unmischbarer Legierungspartner. Das Werkzeug der Wahl dafür sind Planeten-Kugelmühlen.